How to diagnose what’s wrong with your Toyota MR2 MK1 Flash codes

Описание к видео How to diagnose what’s wrong with your Toyota MR2 MK1 Flash codes

All of the codes are listed below;

1 = Normal (No codes recorded)
2 = AFM signal (Open in VC, VS, VB, or E2 or short in EC)
3 = Ignition signal (no signal from igniter 4 times in a row)
4 = water temp sensor (fault in coolant temp. sensor circuit)
5 = O2 sensor (open in O2 sensor - lean signal only)
6 = RPM signal (No Ne, G signal within several seconds after start)
7 = TPS (circuit fault in TPS signal)
8 = Intake air temp sensor (fault in intake air temp sensor circuit)
9 = (There is no 9)
10 = Starter signal (no STA signal before engine reaches 800 RPM)
11 = Switch signal (AC switch on, TPS idle switch off, or AT shift in D during check)

Комментарии

Информация по комментариям в разработке

Похожие видео