Wiring Loom Part 1 - Triumph TR7 Restoration Part 18

While I had the wiring loom out to test the headlights and wipers when I restored those, I thought I should have a proper look at it and see what needed doing.

My original plan was to patch the loom and replace any bad wiring, but in the end I decided it would be easier and better to replace the entire loom. So I got started with measuring up the old loom, designing a new wiring diagram and putting together a list of the wires and connectors I'll need for the job.

At the same time, I repaired the circuit board on the dash as the clock wasn't getting power.

*Timestamps*

00:00 Intro
01:39 Testing the Components
04:10 Stripping Down the Old Loom
05:04 Planning the New Loom
07:50 Cleaning & Replating the Fuse Holder
09:17 Fixing the Clock
10:30 Outro

#Triumph #TR7 #Restoration