Boot & Rear End Bits - Triumph TR7 Restoration Part 19

In this episode, I got a few bits done on the back end - I fitted the boot (trunk) lid as well as all the locking hardware and the rear lights.

But while I was at the back end, I swapped the old dampers over for the new ones and then finally got round to spraying cavity wax into all the cavities.

*Products Used*
(Note: some of these are affiliate links through the Amazon Affiliates program, and I will get a small commission if you buy through these links. It won't cost you any extra though!)

Dynax S50 Cavity Wax: https://amzn.to/3A60Sca
Jenolite Rust Remover: https://amzn.to/3E7lSSq
Silent Coat Sound Deadening: https://amzn.to/2X8Pcaf

*Timestamps*

00:00 Intro
00:30 Swapping the Dampers
01:20 Waxing the Cavities
03:40 Fitting the Boot Lid
05:12 Cleaning the Hardware
07:09 Fixing & Fitting the Lights
09:56 Fixing & Fitting the Cover Plates
12:53 Sound Deadening... and a New Aerial
14:22 Some New Wiring
15:59 Fitting the Lock
17:44 Fitting the Lights (part 2!)
18:28 Fitting the New Boot Seal
19:26 Outro

#Triumph #TR7 #Restoration