Скачать или смотреть Ep. 15 - YT624EJ M.S. - Checking and Changing the Auger and Drive Belts

00:00 Start
00:50 Belt System Walkthrough
02:50 Manual Walkthrough
04:08 Dimensional Checks
11:40 Auger Belt Removal
12:23 Drive Belt Removal
14:20 Drive Belt Installation
16:10 Auger Belt Installation
16:45 Final Assembly

In this video we will examine all dimensional checks relating to both the drive belt and auger belts. We will also go through how to remove and install the belts.

See here for key clearances and torque values.

Guide Plate 1 Upper Clearance: 2-3 mm
Guide Plate 1 Side Clearance: 2-4 mm
Guide Plate 2 Lower Clearance: 2-3 mm
Guide Plate 2 Side Clearance: 2-4 mm
Guide Plate 3 Lower Clearance: 2-3 mm
Guide Plate 3 Side Clearance: 2-4 mm
Side Finger Plates Clearance: 1-3 mm

Cable linked springs extended distance: 45 mm

Guide Plate 1 Torques: 10 N-m = 89 in-lbs
Guide Plate 2 Torques: 16 N-M = 142 in-lbs
Guide Plate 3 Torques: 7 N-m = 62 in-lbs
Side Finger Plates Torques: 10 N-m = 89 in-lbs
Center Cover Torques: 10 N-m = 89 in-lbs
Body Lower Plate Torques: 10 N-m = 89 in-lbs

Belts: Mitsuboshi Super AG-X Series with curved top, length refers to nominal circumference
Drive Belt: Mitsuboshi Belting Co. - AG-X LA29 (top width 12.5mm, thickness 8.2mm, length 29")
Yamaha P/N: 7T0-G6242-00
Auger Belt: Mitsuboshi Belting Co. - AG-X LB36 (top width 16.5mm, thickness 9.3mm, length 36")
Yamaha P/N: 7T0-G6241-00, Honda P/N Interchangeable: 22431-V15-003