How to Replace Inner Tie Rod 07-14 Ford Edge

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK02773

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2007-14 Ford Edge.

• Check here for more videos on the 2007-14 Ford Edge:    • Ford Edge 2007-2014 1st Gen  

This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge

Tools you will need:
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 24mm Socket
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• Pliers
• Straight Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• Cotter Pin
• Rust Penetrant
• Wire Ties
• Sledge Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Ford Edge 2007-2014 1st Gen:    • Ford Edge 2007-2014 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.