How to Replace Outer Tie Rods 08-12 Ford Escape

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK04459

This video shows you how to remove tie rod ends from your 08-12 Ford Escape that are old, rusty, bent, or have a bad ball joint, and replace them with new, quality, engineered to fit parts from TRQ.

• Check here for more videos on the 2008-12 Ford Escape:    • Ford Escape 2008-2012 2nd Gen  

This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape

Tools you will need:
• 21mm wrench
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Pliers
• 1/2 Inch Breaker Bar http://1aau.to/oa/1AXAA00078
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Cotter Pin
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Ford Escape 2008-2012 2nd Gen:    • Ford Escape 2008-2012 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.