How to Make a Mirrored Visor Under $20

Hi everyone!
So as I continue to work on my EOD Helmet, I thought I'd make a short video on how I create my visors. It's budget friendly; all you really need are some clear dividers that go in a 3 ring binder and some mirrored film you can find on the link below! If you have any questions, feel free to leave them in the comments below and I'll be happy to answer any feedback.

One Way Mirror Window Film Gold Silver - https://amzn.to/3KiZ7Ac

Here is the link to the shop I purchased the model from: https://www.aguilarworkshop.com/produ...

3D Printers I use - CR-10 V3 - https://amzn.to/3CcfxG2
Print Settings
-0.6mm nozzle
-3 layer walls
-15% density
-7% support density
-75 mm/s speed

Tools Used:
_____________________________________________

-Milwaukee M12 Detail Sander - https://amzn.to/3I3uayY
-Filler Primer (Similar to the one I used in video) - https://amzn.to/3FYIExq
-3M Sanding Blocks - https://amzn.to/3WJZ5EJ
-Precision Kit - https://amzn.to/3YRt7bh
-Cutting Pliers - https://amzn.to/3YTc88P
-RIDGID Detail Vacuum Set - https://amzn.to/3VoqStm
-Compressed Air Cans ( Air compressor works the same) - https://amzn.to/3Wsi46T

Camera Gear:
_____________________________________________

Sony A7SIII - https://amzn.to/3WD8H4g
Sigma 24-70mm - https://amzn.to/3Gu5ezL
Go Pro Hero 10 - https://amzn.to/3C2idFY