Easy Guide to LIFT a HONDA CR-V!! AVOID this easy MISTAKE and save HOURS of your time

If you like what I do and would like to show support:
https://ko-fi.com/isakjetbean

This is a guide on how to install the Aerogenics 1" lift spacers in the front of your CR-V hassle free and with simple hand tools.

You will need:
1 x 450mm or higher jack
1 x low profile jack
1 x jackstand
1 x socket kit (12mm, 14mm, 17mm)
1 x breaker bar
1 x hammer
3 x zip ties

During the first installation you will need spring compressors so that you can safely loosen and rotate the top hat so that the studs on your new lift spacer are aligned to where the studs on the top hat would typically sit.

Every subsequent removal of the strut, with the techniques used in this video, will no longer require spring compressors to reinstall the strut, as this method doesn't require compressing the springs to install the strut, but simply just for the top hat rotation.

The tricks I used in this guide were shown to me by @gtavila_ on Instagram, he's genuinely the reason I was able to put these in without popping my axle out.

Instagram: @isak.jetbean

You can purchase the lift spacers I use in my CR-V here:
https://www.aerogenicsusa.com



FULL DISCLAIMER:
I'm not getting paid for this video. I made this guide for the sole purpose of helping other people install their lift. I'm genuinely just a fan of the company, and I like to shout out their products.