2013 HYUNDAI ACCENT - HOW TO REPLACE FRONT BRAKE PADS & ROTORS - DIY

https://amzn.to/2LpDAaj This kit is for both front and rear brake pads & Front & Rear Brake Rotors.
https://amzn.to/2L6obdd Sil-Glyde Brake Grease
https://amzn.to/2ZgMMS7 Lisle Brake Caliper Compression Tool
https://amzn.to/2ZgLMNR Impact Screwdriver
https://amzn.to/31UWQ5a Tekton Long Handle 3/8"drive Ratchet
https://amzn.to/2T4l8aP GearWrench Torque Wrench Used in the video

Just a quick and easy video showing how to replace the front brake pads and Rotors on a 2013 Hyundai Accent. These pads weren't worn down too bad, but the owner is sending his kid off to college and wanted to make sure they were new and wouldn't give him any trouble while he is away. I also decided to re-install the outer shim this time. I have left it off in the past and didn't have any problems with it. Also, if you live in an area where vehicles are prone to rust, you might want to have a few of the replacement screws that hold the rotor on the hub available in case they don't want to come off.

I also made a video of how I replaced the rear brake pads & rotors on this same vehicle:
   • 2013 HYUNDAI ACCENT - HOW TO REPLACE ...  

Tools needed:
A large screwdriver or small prybar
14mm socket and/or wrench
17mm Socket and/or wrench / Breaker Bar
Large Impact Screwdriver
Hammer
Torque Wrench

Torque spec for the caliper bolt is 23 ft. lbs.
Torque spec for the Caliper Bracket bolt is 73 ft lbs.

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman

Song used in the video:
"Welcome" by Anno Domini Beats

As an Amazon Associate I earn from qualifying purchases.