2013 HYUNDAI ACCENT - HOW TO REPLACE REAR BRAKE PADS & ROTORS - DIY

https://amzn.to/2LpDAaj This kit is for both front and rear brake pads & Front & Rear Brake Rotors
https://amzn.to/2L6obdd Sil-Glyde Brake Grease
https://amzn.to/3bJ8qot Caliper Compression Tool used in the video
https://amzn.to/2ZgLMNR Impact Screwdriver
https://amzn.to/31UWQ5a Tekton Long Handle 3/8"drive Ratchet
https://amzn.to/3dTVfm2 Milwaukee M12 FUEL 3/8" drive Extended Reach Impact Ratchet
https://amzn.to/2T4l8aP GearWrench Torque Wrench Used in the video

Just a quick and easy video showing how to replace the rear brake pads and Rotors on a 2013 Hyundai Accent. If you live in an area where vehicles are prone to rust, you might want to have a few of the replacement screws that hold the rotor on the hub available in case they don't want to come off.

I also made a video showing how I replaced the front brake pads & rotors on this same vehicle:
   • 2013 HYUNDAI ACCENT - HOW TO REPLACE ...  

Tools needed:
A large screwdriver or small prybar
14mm socket and/or wrench
Large Philips number 3 Impact Screwdriver
Hammer
Torque Wrench

Torque spec that I found online for the caliper slide pin bolt is 23 ft. lbs.
Torque spec that I found online for the Caliper Bracket bolt is 53 ft lbs.

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman

Song used in the video:
"The High Line" by Causmic

As an Amazon Associate I earn from qualifying purchases.