Momentary Paralleling of transformers|Momentary paralleling of sources

Momentary paralleling of transformers or sources are required for manual bus transfer.
In industry at distribution level continuous paralleling is not used to avoid high value of fault current. If two or more no of sources are connected in parallel then it increases the fault level. Also if a certain amount of load is delivered through two transformers in parallel then if one transformer is get out of service the load delivery capacity reduces.
Hence it is often practiced to consider 100% redundancy of source is considered. So if you want to change the load from one source to another without interrupting the load you will need momentary paralleling.

#ElectricalTechnologyAndIndustrialPractice, #MomentaryParalleling, #Parallel_Operation_Of_Transformer,

What is momentary paralleling of transformer
Momentary paralleling
sustained paralleling vs momentary paralleling
why momentary paralleling is used
manual bus transfer
bus transfer without interruption
momentary paralleling for bus transfer
method of manual bus transfer
Momentary paralleling of sources
Momentary paralleling of incomers
how momentary paralleling is implemented
steps for momentary paralleling
how sustained paralleling is avoided during momentary paralleling
purpose of momentary paralleling

Hope you have enjoyed this video. Please like, share, comment and subscribe..
Thanks for watching the video.