I2C | Raspberry Pi Pico Workshop: Chapter 4.4

🔗 The full course : https://core-electronics.com.au/cours...

I2C or Inter-Integrated Circuit, is a really handy communication protocol that can be used to connect over 100 devices together with only 2 wires! In this video we will dive into that a little by taking a look at the uses of I2C, how to wire up multiple I2C devices, and taking a look at an I2C OLED module, an incredibly helpful device that can be added to any project.

🔧🔨🧰 Hardware featured in this guide:

Raspberry Pi Pico:
https://core-electronics.com.au/catal...
OLED Display:
https://core-electronics.com.au/catal...
Atmospheric Sensor:
https://core-electronics.com.au/catal...

💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: http://coreelec.io/forum

0:00 I2C Overview
1:51 Wiring up an I2C OLED Display
3:40 Writing Code for the OLED Display
5:37 Wiring up an Atmospheric Sensor
7:25 Writing Code for the Atmospheric Sensor
11:05 I2C Addresses
12:15 Managing I2C Address
12:38 3 Key Takeaways

🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspb...
• Arduino https://core-electronics.com.au/ardui...
• Sparkfun https://core-electronics.com.au/brand...
• Adafruit https://core-electronics.com.au/brand...
• Pololu https://core-electronics.com.au/brand...
• DFRobot https://core-electronics.com.au/brand...

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo