Warping the Home Loom (Time lapse)

This video will show you the entire process of warping from back to front: winding the warp onto the warp beam, threading the heddles, threading the reed, and finally lashing on to the cloth storage apron. We used an AVL warping wheel to wind the warp onto a sectional beam for our 24" Home Loom. Removing the breast beam and beater ensures there is plenty of room to thread the heddles. Then replace the beater, hold it in place with the included pin and thread the reed. After replacing the breast beam, easily lash on to the apron rod for the cloth storage beam. This process took about 7 hours but through the power of time lapse video, we've condensed it into a 10 minute video.