How to Replace Inner Tie Rods 2010-2013 Kia Forte Koup

Buy Now!
New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK12918
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE01418

This video shows you how to replace the inner tie rods on your 2010-2013 Kia Forte Koup. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup

Tools you will need:
• Pry Bar https://trq.video/oafQ-1AXAA00020
• 21mm wrench
• 22mm Wrench
• 14mm Socket https://trq.video/ocsh-1AXAA00015
• 17mm Socket https://trq.video/ocsh-1AXAA00015
• 21mm Socket
• Brake Caliper Hanger https://trq.video/oox-1AXAA00439
• Inner Tie Rod Removal Tool https://trq.video/obf-1AXAA00438
• Needle nose pliers https://trq.video/oKQ-1AXAA00051
• Needle nose pliers https://trq.video/oKQ-1AXAA00052
• Wire Cutters
• Socket Extensions https://trq.video/ocsh-1AXAA00015
• Torque Wrench https://trq.video/obtv-1AXAA00044
• Anti-Seize Grease
• Copper Anti-Seize
• Gloves https://trq.video/obCp-1AXSS00048
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Floor Jack https://trq.video/oaLK-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaye-1AXAA00065
• Pick https://trq.video/oaa3-1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Kia Forte 1st Generation 2010-2013:    • Kia Forte 1st Generation 2010-2013  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.