Stuck Rc pinion removal tool ( Pinion Puller )

Welcome back to WTF Rc Cars,

Some tools you just don’t know you need them until you really need them,
This is a must have tool for all who are into Rc,

It comes with 3 different sized shafts compatible with most Rc motors from losi mini t 2.0 to the hobbywing AXE motors 5mm shaft,

When the grub screw is rounded off there are a few options like forcing the pinion off that can ruin a good motor or drilling out the grub screw that can ruin both the pinion and the motor shaft,

This give you a chance to remove the pinion without damage to the motor or output shaft you can then decide if you want to have a go at removing the bad grub screw or just get a new pinion

Once the pinion is removed you can back the handle out and push off the pinion from the tool.

This was the cheapest I could find at the time on Amazon, £6.37
https://www.amazon.co.uk/dp/B07Z4WDH4...