Grandma3 Midi to OSC - Part II: Midi to OSC mapping using Chataigne

Part II of this series deals how to map control elements of a X-Touch Compact midi controller via OSC to GrandMA3 step by step. The mapping is done by the free software "Chataigne".
https://benjamin.kuperberg.fr/chataig...

My website with additional material and files for downloads.
https://stkrumm.de/grandma3-tutorial/

There is an error in the spoken comment at 3:24. Should read "control change 9".

Although I use the Behringer X-Touch Compact, any other midi controller or even a midi keyboard can be used.

A word of warning:
I had issues with 3 of the X-Touch devices. Behringer was very helpful, but finally I had to decide to live with it and build a work around.

All my devices didn't initialize correctly afte power on.
The faders would only send either "0" or "127".
I must activate layer "B" and switch back to "A" for sending a continuous stream of values between 1 and 100.
One error remains. On fader movement a CC26 is sent sporadically.