How to Replace Steering Shaft 2007-2009 Saturn Aura

Buy Now!
New Intermediate Steering Shaft with Coupler from 1AAuto.com https://trq.video/ia-1ASTC00184

This video shows you how to install a steering shaft on your 2007-2009 Saturn Aura. Depending on the type of vehicle, the shaft connecting your steering wheel to the steering mechanism may be exposed, and prone to wear or corrosion. If there is play in the steering, or a chance of breakage, it’s best to replace it!

This repair was done on a 2007 Saturn Aura XE 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura

Tools you will need:
• Pry Bar https://trq.video/ogQ-1AXAA00020
• 11mm Socket https://trq.video/oyo-1AXAA00015
• 15mm Socket https://trq.video/oyo-1AXAA00015
• 19mm Socket
• 7mm Socket https://trq.video/ouM-1AXAA00017
• 1/2 Inch Impact Gun https://trq.video/ob5-1AXAA00252
• 3/8 Inch Impact Gun
• Socket Extensions https://trq.video/oyo-1AXAA00015
• Liquid Thread Locker
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Saturn Aura 2007-2009 1st Generation:    • Saturn Aura 2007-2009 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.