IP BAT WIFI Wiring and Programming for the Interlogix NetworX Tutorial

Jason of Alarm System Store takes your through a how-to tutorial on wiring and programming the IPDatatel IP BAT WIFI for the Interlogix NetworX alarm systems. He'll show you exactly where on the board each wire lands and how to go through the programming so that the IP BAT can interact with the NetworX panel.

The IP BAT WIFI from IPDatatel is an internet only self-notifying device that will send the user an email, text, or automated phone call of alarm events, arming and disarming, and trouble conditions. It will also allow, through keybus hookup, remote control of the Interlogix panel.

The Interlogix NetworX panels are a line of alarm control panels that will give you the ability to wire in hardwired devices or use Interlogix wireless detection devices by adding the NX548E 48 zone wireless receiver.

The NetworX NX4 can handle up to 8 zones with 4 onboard and up to 8 user codes. The NetworX NX6 can handle up to 16 zones with 6 onboard and the rest can be had with zone expanders or wireless receivers. And finally, the NetworX NX8 can handle up to 48 zones with 8 onboard and more to be had by adding zone expanders or a wireless receiver.

You can check out all of the kits that we offer in the Interlogix NetworX series by visiting this link - https://www.alarmsystemstore.com/coll...

You can learn more about the

Please comment in the comments section if you have any questions and be sure to slap that like button and subscribe to our channel for all of our how to videos for some of today's most popular DIY security systems.

You can also visit our website at http://alarmsystemstore.com for all of our great deals on security equipment.

You can also follow us on the following social sites for information, coupon codes, and much more!

Facebook -   / alarmsystemstore  
Twitter -   / alarmstore  
Google+ - http://plus.google.com/u/0/b/11635252...