How to Adjust the Guide Light Frame Waistbelt | Mystery Ranch

We're going to go over how to detach the belt from the guide light frame. This is the frame system that will show up on the Marshall, Metcalf, Pintler, Cabinet and the Mule.

To start we are going to unthread the webbing from the back tri-glide of the belt, not to be confused with the redirect belt towards the front. Repeat this process on both sides.

Once the webbing is free, the next is going to be loosening and detaching the webbing on the outer wing. There is a small male/female buckle in the back that will need detached and then remove the velcro from the front and back wing. This will free the belt from the frame. Again, repeat this process on both sides.

Once the webbing is completely detached, unbuckle the male/female buckles on the waistbelt so you can pull the wrap through the lumbar. Stick your hands behind the lumbar to break the velcro seal. Once the velcro is apart you can shimmy the belt through the lumbar.

At this point, your belt is free from the frame. To reattach you are going to reverse the operation!

https://www.mysteryranch.com/guide-li...