How to RE-GREASE your Front Wheel Bearings - Isuzu MU-X/D-MAX DIY Tutorial

G'day Guys and Gals!

Re-greasing your front wheel bearings is a very important job that is required as part of regular maintenance. The Wheel bearings should be re-greaser approximately every 30-45,000km depending on your vehicle and the driving conditions. Under severe driving conditions and when doing regular water crossings it will be necessary to re-grease the wheel bearings more regularly.

I use a general purpose HTB II bearing grease to ensure my wheel bearings stay well greased no matter what the conditions are that I'm driving in. Using a good quality High temp bearing grease or marine grease will ensure that the wheel bearings stay properly lubricated, cool and in good condition.

The steps involved in re-greasing and re-packing your wheel bearings are-
1. safely secure the vehicle and jack up wheels
2. place jack safety stands under vehicle
3. remove front wheels and put wheels under vehicle as a safety precaution
4. remove the brake calipers
5. remove the free wheeling or auto locking hub
6. remove brake disc and bearing hub
7. remove front wheel bearing
8. remove rear wheel bearing and hub seal
9. clean out old bearing grease
10. re-pack and re-grease wheel bearings with fresh HTB grease
11. reassemble hub and refit rear hub seal
12. refit hub to stub axle and tension to specification
13. reassemble and refit hub and check bearing resistance
14. reassemble and clean brakes
15. refit wheel and recheck for bearing play
16. Lower vehicle and tension wheel nuts to specification
17. All done :)

In this video I give you a thorough DIY tutorial on how to re-grease your front wheel bearings on your Isuzu Mu-x and D-max. This tutorial can also be used as a guide with other vehicles like the Holden Colorado and Colorado 7.

Firstly we start by chocking the rear wheels, raising the vehicle and placing a jack stand under the front of the vehicle. Then we remove the wheel and start disassembling the brakes and front hub. I show you in detail exactly how to do the job, the parts required and the type of grease to use.

Thanks a lot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )

I have fitted every modification to the Isuzu MU-X myself and really enjoy filming and teaching you guys how to do the same to your own 4x4 vehicles. The modifications I have done are listed below -
-AFN Bull Bar
-AFN 9" LED Spotlights
-Domin8r Extreme 12000IB winch
-AUXBEAM S3 LED Foglights
-Oricom DTX4200 UHF Radio with Town and country Aerial Kit 3dbi + 6.5dbi
-Falken Wildpeak AT3 - 275/70r17
-Fuel Vector - Fuel off-road racing rims - 17x8.5 Pos 7.4mm offset
-Outback Armour Expedition H/D Lift Kit
-ECU Shop Super 4 Touch Tuning Module
-HIKEITX9 Throttle Controller
-SCF Flat step rock sliders with checker plate - Satin Black
-Genuine Towbar
-Full size 265/70r17 A/T spare on steel rim
-Custom rear draw setup
-CF50 Waeco Fridge
-Giant 85AH AGM secondary battery
-Redarc BCDC1225D Smart Charger
-TITAN 900mm Single draw
-Genuine ISUZU Floormats
-ILANA Neoprene Seat covers
-Dashmat
-Provent 200 Catch can kit from Western Filters
-Diff, Transfer, Gearbox Breathers
-LED interior light upgrades
-LED reverse light upgrade
-Engine bay HPD Bling Parts
-All Terrain Industries Hard Intercooler Piping Kit
-Harrop Rear E-Locker
-Yakima LockNLoad Roof Rack system
- Iron Man 2.5m x 2.5m Side awning
-Auxbeam 42" 5D Pro series Roof Light bar

Thanks a lot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )

LowRangeNick -

Instagram -   / lowrangenick  
Facebook -   / lowrangenick