Airbrush Spray Booth Build, How to Make it with Lights & Noctua Fan!

Airbrush Spray Booth Build, How to Make it with Lights & Noctua Fan!
Build a custom airbrush spray booth to your own requirements with good lighting and ventilation, as I did for around 90 - 130€. In this step by step tutorial, you will learn how to build your own airbrush spray booth for acrylic water based airbrush painting, in which I go into details how to make an enclosure out of rigid foam boards with a filter frame, install the filter, inside I put a basic fan and the cheapest LED lights, outside I glued on a universal reducer and put an exhaust hose on top of that.
You should be aware that breathing in any paint either it’s paint dust, vapor or solvents from any kind of spraying, is harmful to your health and with proper ventilation system you can eliminate this risk.
Please also note that the build itself is not explosion-proof, meaning that it can ignite if fan sparks when there are enough flammable vapors from aerosol spray painting around.

Materials used in this build
rigid foam board
filter
LED strip
Noctua NF-A14 2000 exhaust fan, but I recommend Noctua NF-A14 3000
3 or 4-pin PWM USB cable
OR
dc-dc step up voltage regulator and regular phone charger
Noctua anti-vibration mount
universal reducer
PVC exhaust hose

If you have any questions or comments, feel free to ask below!

Timestamps:
00:00 Intro
01:41 List of materials
03:56 Enclosure
10:34 Filter frame and filter
14:37 LED lights
18:27 Fan
27:42 Cable and hose management
30:54 Outro - B-roll


Noctua fans: https://noctua.at/en/products/fan
Noctua NF-A14 2000 - https://noctua.at/en/nf-a14-industria...
Noctua NF-A14 3000 - https://noctua.at/en/nf-a14-industria...
4-pin PWM fan running on 3-pin fan headers - https://noctua.at/en/productfaqs/prod...
pin-configuration of Noctua - https://noctua.at/en/productfaqs/prod...


This video is not sponsored by anybody, but based on the research, these were most convenient to get and build it.