BMW E90 Oil Cooler Retrofit DIY

The early N54s in the 2007 335i didn't come with oil coolers installed from the factory. In this video, I'm gonna show you how to retrofit one. The oil temp seems to be running about 10F cooler since I did this. Enjoy the video!

Parts List For E90 N54 Oil Cooler Upgrade:

11428642289 Oil Filter Housing With Cap
11428637821 Oil Filter Housing Gasket
11427573212 Oil Cooler Thermostat Housing With Thermostat
11428637820 Oil Cooler Gasket

17227521376 Oil Cooler
17217540030 Plastic Holder for smaller Oil Cooler Bolt
07147144953 Hex nut for oil cooler to body bracket (x2)
07119903995 Small Hex bolt for oil cooler bracket

51717162272 Air Duct For Oil Cooler, front right
07119905241 Screws for holding air duct to oil cooler (x3)

17227567207 Engine oil cooler pipe, flow
17227567208 Engine oil cooler pipe, return
17227555715 Screw for oil cooler lines (x2)
17222245358 O-rings for oil cooler lines (x4)
64216904030 Plastic clamp for oil cooler lines

51647154546 Front Bumper Carrier Bracket, Right
51717162276 Fender Liner - Right
51717161436 Oil Cooler Grille For Fender Liner - Right
51747160610 Air Duct Next To Oil Cooler Duct, Front Right
51117134080 Bumper grid, fully open, right

Here is the sport oil cooler "valve" (looks like it just bypasses the thermostat and lets the oil run through the cooler full time):

https://burgertuning.com/collections/...

This is the upgraded "mickey mouse" flange (video on this coming next week):

https://burgertuning.com/collections/...

This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.