https://bit.ly/Get-Valar-Plus Click here to shop for Valar Plus Granular Insecticide and more with free shipping!
Want to skip ahead?
Introduction 0:00
Tools Needed: 0:29
How to Use: 0:40
Where & When to Use: 1:33
Safety: 2:20
---
If your lawn is infested with surface or subsurface pests like fleas, ticks, or ants, then use Valar Plus to eliminate infestations and prevent new pests from settling in. Valar Plus is a bifenthrin-based granular insecticide labeled to kill many pests commonly known to invade lawns and gardens. When applied properly, Valar Plus protects treated areas for up to 3 months, has no odor, and is completely harmless to people, pets, and non-target animals.
Before any application, put on your personal protective equipment, or PPE. Wear a long-sleeved shirt, long pants, closed-toe shoes, and chemical-resistant gloves.
Calculate the size of your treatment area to determine how much product you’ll use. Depending on the pest you’re treating, the labeled mix rate will range from 1.15 pounds of product applied per 1,000 square feet to 4.6 pounds of product per 1,000 square feet. For a general application, you can apply 2.3 pounds of product per 1,000 square feet.
Make sure the grass is dry before application, and load your spreader with the proper amount of Valar Plus.
Evenly distribute your product throughout your treatment area. With a push spreader, broadcast half your granules in parallel lines once across the area, then broadcast the other half at a perpendicular angle.
Activate Valar Plus with up to half an inch of water directly following application. For a rounded pest control plan, you can make an application of Supreme I/T over treated areas. Supreme I/T is a liquid concentrate made with bifenthrin. Use an application rate of 1 fluid ounce of Supreme I/T applied over 1,000 square feet. With this, you gain total coverage of your turfgrass and drive Valar Plus into the soil to control subsurface pests.
Labeled pests that make contact with the product will have their nervous systems impacted and will die after several hours. This product remains active for up to 3 months under normal weather conditions and will prevent further pest activity from taking place.
Spread Valar Plus to control pests on residential, public, institutional, commercial, and industrial properties. Areas of application include, but are not limited to: lawns, ornamental garden beds, structure foundations, fencelines, and deck perimeters.
Apply Valar Plus to eliminate an active pest infestation on your property or to prevent activity before it can flare out of control. Ensure there will be no rainfall within 24 hours after application. For regular seasonal prevention, it is recommended to apply Valar Plus during the fall and early spring.
Thanks for watching!
#diypestcontrol #solutionspestandlawn #insecticide
Информация по комментариям в разработке