How to Replace Brake Light Switch 2003-2007 Honda Accord

Buy Now!
New Brake Light Switch from 1AAuto.com https://trq.video/ia-1AZMX00647

This video shows you how to install new brake light switch in your 2003-2007 Honda Accord. The brake light switch is a sensor or switch that is connected to your vehicle’s brake pedal. It is the switch that is responsible for turning on brake lights. It is a very important piece of equipment. If the switch in your vehicle has failed, replace it as soon as possible with a quality direct fit part from TRQ.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obNr-1AXAA00013
• Phillips Head Screwdriver https://trq.video/obNr-1AXAA00013
• Trim Tool Set https://trq.video/oaDK-1AXXX00006
• Gloves https://trq.video/obqd-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.