This is how you replace your 3.0T Supercharger Intercooler Cores

While I had the Supercharger off of the car during my PCV swap I decided to inspect my intercooler cores in hopes that cleaning them would fix my IAT issue. In this video I show you how to remove your Throttle Body, as well as your Intercooler cores. Then I show you how to clean the intercooler cores to get them looking like they are new, and then I'll show you how to put everything back together.

Before someone says anything, I know Simple Green can be corrosive to Aluminum, but that is only if you leave it in Simple Green for a very extended amount of time. 12-24 hours isn't going to hurt anything.

Unfortunately, cleaning the IC Cores didn't completely fix my IAT issue, but it definitely helped bring them down about 7-10 degrees, so that is still a win in my book.

Special Tools Needed:
-Extended Torx Bit Set: https://amzn.to/3x8jsi1

Parts Needed:
-Throttle Body Gasket, (x2), 06E145272C
-Supercharger Intercooler Gasket, (x2), 06E145723E
-Coolant Crossover Pipe Gasket, (x4), 06E121119J