How to Replace Inner Tie Rod 2003-2008 Toyota Corolla

Buy Now!
New Tie Rod Set from 1AAuto.com https://trq.video/ia-1ASFK00788
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00232

This video shows you how to replace the inner tie rods on your 2003-2008 Toyota Corolla. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• 19mm Wrench https://trq.video/oR5-1AXAA00010
• 22mm Wrench
• 17mm Socket https://trq.video/obi2-1AXAA00015
• 21mm Socket
• Inner Tie Rod Removal Tool https://trq.video/oaF-1AXAA00438
• 1/2 Inch Impact Gun https://trq.video/oqB-1AXAA00252
• 1/2 Inch Breaker Bar https://trq.video/oqu-1AXAA00078
• Torque Wrench https://trq.video/oaw2-1AXAA00044
• Anti-Seize Grease
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008:    • Toyota Corolla 9th Generation 2003-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.