Wire Wrap Pendant “ADORE” Tutorial.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
•
1.5mm wire (14g) 1 x 9” (23cm)
•
1.5mm wire (14g) half round wire, 2 x 3” (7.5cm)
•
0.8mm wire (20g) 2 x 18” (46cm)
•
0.315mm wire (28g) approx 500cm
•
Oval cabochon, mine is 18mm by 13mm. You can use any size cab you like just remember to adjust the wire lengths and weave repeats
•
5 x 3mm beads

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)


How I oxidize my bare copper -    • Oxidising copper jewellery and after ...  
Facebook -   / kellyjjewellery  
IG jones_kel
IG graciepug_
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.etsy.com/uk/shop/kellyjje...

Thanks for watching x