How to Replace Upper Control Arm in SUV and Pickup - Hummer H3, Chevrolet Colorado, GMC Canyon

How to Replace Upper Control Arm in SUV and Pickup - Hummer H3 Chevrolet Colorado GMC Canyon

Step by step Upper Control Arm Replacement
Raise and support the vehicle.
Remove the tire and wheel assembly.
Support the lower control arm at ride height.
Remove the wheel speed sensor bracket bolt.
Disconnect the wheel speed sensor brackets.
Disconnect the front brake hose from the upper control arm.
Disconnect the upper control arm from the ball stud by removing the pinch bolt.
Remove the upper control arm nuts and the adjustment cams.
Remove the upper control arm bolts.
Remove the upper control arm.
Install the upper control arm.
Install the upper control arm nuts and the adjustment cams. Do not tighten.
Connect the upper control arm to the ball stud by installing the pinch bolt. Tighten the nut to vehicle spec.
Connect the wheel speed sensor brackets.
Install the wheel speed sensor bracket bolt. Tighten the nut to vehicle spec.
Connect the front brake hose to the upper control arm.
Install the tire and wheel assembly.
Remove the lower control arm support.
Lower the vehicle.
With the vehicle at ride height, tighten the upper control arm nuts. Tighten the nut to vehicle spec.
Verify the wheel alignment.

Deals & my Gears on Amazon: https://www.amazon.com/shop/hummansunson
Disclosure: As an Amazon Associate I earn from qualifying purchases

Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician