How to Replace CV AXLE Shaft HUMMER H3, GMC Canyon, Chevrolet Colorado

How to Replace CV SHAFT CV AXLE Shaft HUMMER H3, GMC Canyon, Chevrolet Colorado
#cvshaft #howtoreplace #cvaxle #hummerh3 #h3hummer #h3 #humman

Hummer H3 How-To videos:    • Hummer H3 How-To  

Deals and Gears: https://www.amazon.com/shop/hummansunson
As an Amazon Associate I earn from qualifying purchases

Disclaimer: NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician.


0:00 Tools Required 1. Hi-Lift and car jack 2. High Impact Wrench 3. 36 mm socket for Axle Nut 4. 1/16 wrench/socket 5. 13/16 wrench/socket 6. 10mm wrench 7. 18mm socket/wrench 8. Flat head screwdriver/Flat Pry Bar 9. Small Bucket to catch fluid
2:28 Watch for Steering Knuckle Assembly to drop. You may want to attach rape/belt to upper control arm and Steering Knuckle Assembly before this step - to be safe
2:38 Observation: In some trucks and aftermarket half shafts - you can undo half way down. With OEM shafts - you will have to completely undo and detach Steering Knucke
3:38 Warning: When installing the front wheel drive shaft, a snap or pop should be heard and felt when the front wheel drive shaft is properly seated in the differential case.
4:12 Torque: Lower Ball-joint nut to Steering Knuckle - 63 lb ft