etrailer | Installing the BedRug Impact Truck Bed Liner in a 2024 GMC Canyon

Click for more info and reviews of this BedRug Truck Bed Mats:
https://www.etrailer.com/Truck-Bed-Ma...
Check out some similar Truck Bed Mats options:
https://www.etrailer.com/truck-bed-ma...

Search for other popular GMC Canyon parts and accessories:
https://www.etrailer.com/vehicle/2024...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Install-B...
Hi, everyone. Bruce here at etrailer. Today we're gonna take a look at and install our BedRug Impact Truck Bed Liner on our 2024 GMC Canyon. A BedRug could be a great option to add to your pickup bed. This bed rug here, it is made out of thermoplastic. Inside the bed is 3/4 quarter inches thick and it does have padding and it's got a nice anti-skid surface.

The other nice thing about this is there is no drilling or anything. It's just got hook and loop fasteners you can take it on and off as you wish. And if you look at the bottom here, this is our polypropylene padding underneath, so it will make for better kneeling if you're kneeling inside your bed. Plus it gives some cushion if you drop anything inside there, it will help protect the bed. Another great feature of this BedRug is there's no screws to screw any of this down.

You can lift this up. (Velcro scratching) Like so and you can still access your tool compartment on your tailgate. As far as the installation goes on this, it is a very easy install. There is a little sanding required if you do have a spray in bed liner, but other than that, it is very simple. But if you feel like you can't handle that or you just don't want to handle it, check out our dealer locator on etrailer.com.

But for you DIYer's, stick around, I'll show you how it's installed. Before we begin our installation, I did lay out everything we have. Of course we have the bed liner, we've got two 36 inch long hook and loop fasteners, and then we've got the short ones. These are for the tailgate part, and then we've got the adhesive to lay down before we fasten those to the bed of the truck. First thing we're gonna go ahead and do, we did put this upside down.

Here's our hook and loop fasteners. We need to take our 36 inch long pieces and go ahead and attach those to the bed liner. You do have one on the other side as well, so you we're just gonna do the same thing. Make sure you push it down, get it in there so it's good connection and we'll just do the same to the other side. Now you may need to grab an extra set of hands as I did and we're gonna leave this upside down and we're gonna go all the way up to the bulkhead of the bed. We are gonna get that where we need it like that. That looks pretty, pretty good. Alright, now that we've got it fairly close, I am going to go ahead and mark where this hook and loop fastener is because we do, if you have a spray in bed liner, we do need to do some sanding under here. So I am gonna mark out here and here for the length of how far I actually need to sand. I'm gonna go ahead and mark that with tape as I stated before. I'm just gonna mark it here and then up towards the front. And basically I'm gonna sand from here to here on our bed liner. If we look up underneath here real quick, we're gonna determine which one we actually need to sand on and it's gonna be this one here and I'll just put a little mark there and we're gonna do the same to the other side. Now that we have where we need to sand marked, we can go ahead and remove our liner and get it out of the way for now. Now here are our tape marks for our hook and loop fastener that's gonna go from here all the way down to here. That's the only part we need to sand, and this is the little raised rail that we need to sand on. We're just gonna go ahead and sand that. (sandpaper scratching) Just scuffing it up so that adhesive will actually stick. Now that we do have that sanded down, we're gonna go ahead and take a wet cloth first and I'm gonna wipe that down and get all that residue or some of that residue up. If you notice how dirty that is. Now we're gonna come back by with some soapy water. We're just gonna spray that down and get that nice and clean. While this side is drying, we're gonna go ahead and do the same thing to the other side. We need to let that dry 'cause we do gotta come back over it with alcohol and clean it again. Once that soap and water is dry, we're gonna go ahead and come back by with some alcohol and clean the top of the rail as well. And again, you're gonna do this on both sides. Now we need to take this adhesive promoter and we need to go ahead and lay it down. Since we do have a spray in bed liner, this is required. If you don't have a spray in bed liner, you do not have to use this. We're gonna go ahead and wipe that