Siteworks SPS930 Total Station Set Up 1

In this video, we will show you how to set up the Trimble SPS930 total station for use with Siteworks. The SPS930 is a high-accuracy total station that can be used for a variety of surveying and construction applications.

To set up the SPS930 for use with Siteworks, you will need the following:

A Trimble SPS930 total station
A Trimble Siteworks data collector
A tripod
A level
A prism

Once you have gathered your materials, follow these steps to set up the SPS930:

1. Attach the tripod to the SPS930.
2. Level the tripod using the level.
3. Attach the prism to the tripod.
4. Power on the SPS930 and the Siteworks data collector.
5. Follow the instructions on the Siteworks data collector to connect to the SPS930.

Once the SPS930 is connected to the Siteworks data collector, you can start using it for surveying and construction applications.

Here are some additional tips for setting up the SPS930:

Make sure that the tripod is level. This is essential for accurate measurements.
Make sure that the prism is properly attached to the tripod. The prism should be centered and level.
If you are using the SPS930 in bright sunlight, you may need to use a shade to protect the display.

For more information on setting up the SPS930, please visit our website: https//sitech-im.com

*Keywords:* Siteworks, SPS930, total station, setup, Trimble, construction, surveying