Fiberglass Y-stern Repair: Hull Exterior FIberglass and Paint

This is the final video on the rebuilding of the y-stern fiberglass canoe. This video has guidance on fiberglassing the hull exterior with epoxy and 6 ounce e-glass. The hull has to be sanded, faired and primed before paint. Since there was no structure to the hull originally we will add two new layers of 6 ounce fiberglass. Fairing and body filling is done with epoxy and glass bubbles and sanded smooth before the primer is applied. Two coats of Interlux Prekote Primer were applied to the hull with an HVLP sprayer.

0:00 - Introduction
0:16- Sanding and Vacuum Hull
0:32 - Adding 6 ounce e-glass to hull
0:44 - Removing Amine Blush
0:48 - Adding the Keel Fiberglass
1:37 - First coat of Primer
2:14 - The hull is block sanded smooth
2:20 - The second coat of Primer
2:38 - The interior is primed
2:51 - Beginning of Project
3:12 - End of Project Result

#diy #fiberglass #repair #boating #canoe #boatlife #painting #spraypaint ‪@WestSystemEpoxy‬ ‪@interluxpaints‬