Wedge Anchor & Decking Post Base Installation | Fasteners 101

In this video, one of our resident fastener specialists talks about wedge anchors, the materials they are available in, and their uses. The specialist demonstrates proper installation of the concrete anchor and a stainless steel decking post base.

Quick Tips:
-Use a Hammer Drill with an SDS Bit of the same diameter
equal to the Wedge Anchor for installation.
-Select the appropriate anchor material for the environment
it will be installed in.
-Tape Drill Bit for drilling depth.
-Wedge Anchor should be embedded in concrete not less
than 2-1/2."
-Clean any debris from the hole or the hole's surface
after drilling.
-Use a Hammer to install the Wedge Anchor into the hole
with a minimum of 1" sticking out, depending on what
materials will be anchored.

Need some Wedge Anchors or Post Bases for a project?
Please visit us at the links below:

Wedge Anchors: https://www.albanycountyfasteners.com...

Decking Post Base: https://www.albanycountyfasteners.com...

For all your other fastener needs, please visit us: https://www.albanycountyfasteners.com

For more Fasteners 101 information, please visit our website here: https://www.albanycountyfasteners.com...