How to Replace Lower Control Arm 1994-2004 Chevrolet S10

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/id/1ASLF00215

This video shows you how to install a lower control arm on your 1994-2004 Chevrolet S10. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 18mm Wrench
• 21mm wrench
• 7mm Wrench
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• Side Cutters
• 11/16 Inch Socket http://1aau.to/ob/1AXAA00016
• 7/8 Inch Socket http://1aau.to/oa/1AXAA00042
• Ratchet http://1aau.to/ob/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bungee Cord
• Rust Penetrant
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Pick http://1aau.to/oa/1AXAA00037

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.