HOW TO CHANGE VOLUME ON PROFFIE SABER (SABERTRIO)

TIMESTAMPS
0:00 - Intro
2:15 - Step 1 Installing Arduino / Setup (make sure to add extra boards manager URL into Arduino preferences)
5:45 - Step 2 Remove SD Card From Saber
6:35 - Step 3 Insert SD Card Into Computer
7:14 - Step 4 Back Up ALL Contents on SD Card
8:47 - Step 5 Find Config File on SD Card
9:36 - Step 6 Redefine Volume # To Desired Level
10:23 - Step 7 Save Config File
10:56 - Step 8 Eject and Remove SD Card and Place Back In Saber
12:12 - Step 9 IMPORTANT: Data vs Power Cable [NO POWER CABLE]
13:25 - Step 10 IMPORTANT: Saber MUST BE OFF [NO POWER TO BOARD]
13:50 - Step 11 Plug Saber Into Computer Using DATA ONLY Cable
16:36 - Step 12 Install Zadig If Computer Doesn't Recognize Saber
19:36 - Step 13 Open Arduino - Verify - Upload
26:13 - Step 14 Eject SD Card and Saber - Disconnect From Computer
26:35 - Step 15 Reconstruct Saber [Volume Has Been Lowered]

*A more detailed description of the steps can be found pinned at the top in the comments section


SOFTWARE LINKS
Arduino: https://www.arduino.cc/en/software
GitHub: https://github.com/profezzorn/arduino...
Zadig: https://zadig.akeo.ie/


SABERTRIO USER GUIDE: https://sabertrio.com/pages/user-guide

FEATURED IN THIS VIDEO
||
SABERTRIO: https://sabertrio.com/
SOLOGAARD: https://sabertrio.com/products/sologa...
COREN BLADE PLUG: https://sabertrio.com/collections/bla...
STAND: https://sabertrio.com/collections/cus...





*NO LINKS IN THIS DESCRIPTION ARE AFFILIATE LINKS*