Direct veneers using Injection Moulding Technique with G-ænial Universal Injectable and EXACLEAR

Direct Veneers using Injection Moulding Technique with G-ænial Universal Injectable and EXACLEAR is easy and gives you a predictable result.

Injection moulding is a technique that allows to restore multiple teeth at once in an easy way and ensures very predictable and beautiful aesthetic results. What is needed is a good wax-up, a transparent silicone like EXACLEAR and an injectable composite like G-ænial Universal Injectable. The transparency of EXACLEAR allows to easily see what and where you are injecting, to efficiently light-cure the composite through the silicone and to easily place it and remove it without breakage. The use of G-ænial Universal Injectable, which has extremely high wear resistance and flexural strength, ensures the result on the long term. The many shades of G-ænial Universal Injectable guarantee very good aesthetic results are easily attainable.

Procedure:
-create a gypsum model based on the desired result. 3D printed material can be used as well
hydrate the gypsum model to remove any debris and ensure the transparency of EXACLEAR is not compromised
take the impression of the gypsum model with EXACLEAR
after setting (extra-orally in 7 min, intra-orally in 2 min) remove the impression and trim as desired
create access holes in the mould with the G-ænial Universal Injectable tip or with a diamond bur the size of the composite tip and then check the fit
isolate, etch accordingly and apply the bonding agent
isolate adjacent teeth with Teflon tape
Inject G-ænial Universal Injectable. Allow some overflow, then light-cure
remove the silicone mould and remove the excess
apply, as described above, for the other teeth
finish margins and polish with your standard polishing procedure
For more information on the products visit https://europe.gc.dental/products/exa... and https://europe.gc.dental/products/gae...