How to Replace Crankshaft Position Sensor 2003-2007 Honda Accord

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com https://trq.video/ia-DEECS00093

This video shows you how to install a new crankshaft position sensor from TRQ on your 2003-2007 Honda Accord. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

Estimated installation time for a professional technician is approximately: 4 hours 36 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• 14mm Wrench https://trq.video/oaiK-1AXAA00010
• 15mm Wrench https://trq.video/oaiK-1AXAA00010
• 17mm Wrench https://trq.video/oaiK-1AXAA00010
• 10mm Socket https://trq.video/obRB-1AXAA00017
• 12mm Socket https://trq.video/ociZ-1AXAA00015
• 14mm Socket https://trq.video/ociZ-1AXAA00015
• 19mm Socket
• Trim Tool Set https://trq.video/oaDq-1AXXX00006
• Ratchet https://trq.video/ociY-1AXAA00016
• Socket Extensions https://trq.video/ociZ-1AXAA00015
• Torque Wrench https://trq.video/obmE-1AXAA00044
• Bungee Cord
• Marker / Writing Utensil
• Floor Jack https://trq.video/oaFD-1AXAA00068
• Jack Stands https://trq.video/oar6-1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.