PMC ADAPTER KIT - 1JZ to BMW M3 ZF - FULL INSTALL!

1JZ S13 SWAP EP. 5! In this video, we do a FULLY DETAILED install of the PMC Motorsport Race Stage 1 Toyota 1JZ (jz, 1jz, 2jz, vvti) to BMW E36 M3 ZF5 Adapter Kit! (Check the end of the description for TIME STAMPS!)
This kit includes the Adapter Plate, a lightweight flywheel with pilot bearing, a 240mm 5 Puck (unsprung) Sintered Clutch Disc, a Sach's Performance Pressure Plate, extended Pivot Ball, crank extender, and all the hardware needed for assembly! I also put on a brand new slave cylinder, clutch fork and spring clip, and a throwout bearing from Bimmerworld! And we finished off with a Garagistics Dual Shear Selector Rod and Drift HQ Guibo Adapter.

Huge thank you to @Drift HQ for helping me get all these parts for the swap, and having the best customer service of any company I've bought from! Follow the links below for all the parts in this video!

PMC Adapter Kit (with flyhweel and clutch kit)
https://www.drifthq.com/products/pmc-...
Drift HQ Guibo Adapter
https://www.drifthq.com/products/drif...
Garagistic's DSSR
https://www.garagistic.com/products/e...
Bimmerworld
Slave Cylinder:
https://www.bimmerworld.com/Clutch-Sl...
Throwout Bearing
https://www.bimmerworld.com/Throw-Out...
Clutch Fork
https://www.bimmerworld.com/Clutch-Re...
Spring Clip
https://www.bimmerworld.com/Clutch-Sp...

INSTALL PROCESS TIME STAMPS
5:00 - Crank Extender
6:10 - PMC Adapter plate
9:15 - Auto Flexplate and spacer
10:30 - PMC Lightweight Flywheel
12:30 - PMC Clutch disc
13:35 - Sach's Pressure plate
16:00 - Clutch slave, fork, pivot ball and throwout bearing
20:40 - Bolting up the ZF5 trans
21:54 - JZ Starter Install
26:11 - Garagistic DSSR install
27:00 - Drift HQ Guibo Adapter