How To INSTALL a Chevy 350 WATER PUMP

How to install an ACDelco water pump on a 1976 C3 Corvette Stingray. Part 2 of 3.

Replacing the water pump on a C3 Corvette is not difficult, as long as you have a good set of tools and can take your time to see the process from start to finish.

In Part 2 I cover the following:

▶ Refinishing the new ACDelco pump to prevent rust
▶ Using Red Thread Locker to keep the fan studs securely in place
▶ Removing old gaskets and installing new Fel-Pro gaskets
▶ Installing the new pump
▶ Using thread sealant to avoid leaks
▶ Attaching the belts to the A/C compressor and alternator
. . . and much more!

I broke this project into three parts to keep the videos from getting too long.

This is a complete series covering each step, from removing the old water pump to installing a new pump, refilling the cooling system, and starting up the car to ensure there were no leaks or issues.

If you follow my blog (www.76vette.com), then you are aware that my '76 Vette was having overheating issues, and I decided to replace the aftermarket water pump, which was starting to fail, with an ACDelco unit, which actually fits much better.

I also addressed the installation of new water pump fan studs, since the old pump studs barely allowed for three threads to secure the fan, which was cutting too close for my taste.

I was lucky that the upper and lower radiator hoses were in new condition (I installed new hoses about five years ago), and I was able to reuse them. Replacing the lower radiator hose is not easy, and I was glad to be able to avoid it.

Below is a list of parts and products related to this project. Sometimes it's worth your time and effort to replace older components such as the thermostat, temperature-sending unit, and more.

I hope these videos are helpful if you decide to replace your C3 Corvette's water pump.

Thank you for watching! 🙂👍🏻

=====================================

CORVETTE-RELATED PRODUCTS (sponsored)

- C3 Corvette ACDelco Water Pump: https://amzn.to/37Njbaw
- Stant SuperStat Thermostat: 195° Fahrenheit: https://amzn.to/3gvttPo
- Fel-Pro Thermostat Housing/Water Outlet Gasket: https://amzn.to/37QkuEg
- Dorman Engine Coolant Thermostat Housing: https://amzn.to/2VYSSYd
- Mr. Gasket O-Ring-Style Water Neck, Chevy: https://amzn.to/3lXRMX7
- SpillProof Radiator Coolant Filling Funnel Kit: https://amzn.to/346EmSz
- SpillFix 2-in-1 100% Organic Spill Absorbent Compound: https://amzn.to/2KlEBlS
- Zerex Original Green Prediluted Antifreeze/Coolant: https://amzn.to/3gIxakz
- ACDelco Engine Coolant Temperature Sensor: https://amzn.to/38hXlL6
- Prestone Radiator Flush and Cleaner: https://amzn.to/3mN3wfx
- 4 Gal. Oil and Coolant Drain Pan with E-Z Grip Handles: https://amzn.to/2WMSgFA
- Permatex Thread Sealant with PTFE: https://amzn.to/3nSJDVB
- Fel-Pro Water Pump Gasket (2): https://amzn.to/2JkHBP8
- Kizen Digital LaserPro Infrared Thermometer: https://amzn.to/3hjPHUF

======================================

DISCLAIMER: Even though I like to wrench on my Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.

I am a DIYer, and the repairs and work shown are for my benefit and entertainment. If videos appear to give technical how-to advice, that is not my intention.

Working on a vehicle can be dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a professional mechanic.


#corvettec3 #c3 #c3corvette