How to Replace Front Lower Control Arms With Ball Joint 2012-2017 Hyundai Accent

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASLF00945

This video shows you how to install new front lower control arms with ball joint from TRQ on your 2012-2017 Hyundai Accent. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 1 hour 36 minutes

This repair was done on a 2012 Hyundai Accent SE 1.6L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Hyundai Accent
2013 Hyundai Accent
2014 Hyundai Accent
2015 Hyundai Accent
2016 Hyundai Accent
2017 Hyundai Accent

Tools you will need:
• Pry Bar https://trq.video/oagT-1AXAA00020
• 19mm Wrench https://trq.video/oapN-1AXAA00010
• 17mm Socket https://trq.video/ocuj-1AXAA00015
• 19mm Socket
• 21mm Socket
• 1/2 Inch Impact Gun https://trq.video/oBb-1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/octR-1AXAA00016
• Swivel
• Torque Wrench https://trq.video/obvn-1AXAA00044
• Gloves https://trq.video/obFG-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaNs-1AXAA00068
• Jack Stands https://trq.video/oazZ-1AXAA00065
• Pole Jack
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Hyundai Accent 4th Generation 2012-2017:    • Hyundai Accent 4th Generation 2012-2017  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.