Lock picking stand, & a few tips on how to make one yourself.

If you ever thought about making a lock stand, this video could help. It talks a bit about what tools, and fasteners you can use, as well as how to keep the cylinders in place, so they can't slip out.
I also showed how I up cycled a oak sign and turned it into my lock stand.

Link for Set screw used in video
Stainless 6-32 x 1/2" (1/4" to 1" Available) Socket Set Screws Cup Point, Stainless Steel 50 Qty W/Hex Key Wrench (6-32 x 1/2") https://a.co/d/a0bHAuM

Link to drill bit and tap that was used (off camera)
Irwin Tools Irwin 80213#6x32 NC Tap/Drill Set https://a.co/d/8AhKMrz

Link to longer Hex keys that was used
uxcell 1/16" Ball End Hex Key Wrench, L Shaped Long Arm CR-V Repairing Tool, SAE 4 Pcs https://a.co/d/cJDEEVo

28mm hole drill bit that was used
SALI 1-1/12" (28mm) TCT Hole Saw Kit Tungsten Carbide Tipped Hole Saw Drill Bit with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic https://a.co/d/iZmuwMb

Sander for Dremel (to enlarge hole, for snug fit)
AUTOTOOLHOME 20PCS Abrasive Flap Wheel Sander 80 Grit 1/8" Shank Diameter 32mm 3/8" Thick and 1" Abrasive Sandpaper Flap Sanding Wheel Grinding Head Rotary Tool for Grinding and Polishing https://a.co/d/4XZZQVh



If you're reading this, and the video was helpful, or entertaining, or even mildly amusing and you haven't subscribed yet, don't be one of those people, and swipe away. Hit the sub button. Your support would mean a lot.

feel free to share too!!

Either way thanks for hanging out.

I know time is money, so I appreciate you spending some on my channel ⏰⏰⏰⏰


have an Instagram account?
check me out,   / rook__knight  
I post all the things I make, and mod, and more there first!
🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒🔒
#locksport #lockpicking #diy