Shaka RC Flying Wing - Time Lapse Build

In this video I will show you a time lapse build of the Shaka RC flying wing from FlightPoint. The Shaka features a classic balsa construction, reinforced with carbon fiber tube spars and leading edge.
The kit consists of high quality laser cut balsa and plywood parts, carbon tubes and a complete accessory set that includes nylon wing mounting bolts, a pair of M4 nuts to be glued into the fuselage during assembly, control horns, ball linkages, and servo horn clevises for the pushrods.
For more info or for ordering your own Shaka build kit head over to FlightPoint: https://flightpoint.co/

Direct link for odering the Shaka: https://flightpoint.co/product/shaka-...

Link to my Shaka flight video:    • Flying the Shaka RC plane  

Specs:
Wingspan: 965 mm
Length: 440 mm
Weight (AUW): 250 g (in my configuration) incl. 11g GPS Logger
RC functions: elevator, ailerons, motor

My configuration:
Motor: T-Motor F1507 3800 kV
Prop: Graupner Carbon Folding Prop 6x3"
Battery: Tattu 2S 450mAh 75C, Long, XT30
ESC: Graupner Brushless Control + T 18
Receiver: Graupner GR-12 HoTT - 2.4 GHz, 6 channel
Servos: 2x Emax ES08D II
Spinner: VM 25mm Spinner for M5 shafts (Vladimir Models)
GPS Logger: SM GPS Logger 3

Covering film:
ORALIGHT transparent orange (comes out more yellow than orange)
ORALIGHT transparent blue
ORACOVER white
ORACOVER Hotmelt Adhesive (960)
ORACOVER Thinner for Hotmelt Adhesive (980)

Link to the STL file of my dummy spinner: https://drive.google.com/file/d/1QZqZ...

Vinyl:
d-c-fix glossy black vinyl

Paint for fuselage:
Clou Schnellschleifgrund (wood primer)
Dupli Color Platinum white semi gloss

Cutting machine:
BROTHER ScanNCut SDX1000

Camera:
Sony HDR-CX730

Microphone:
Rode NTUSB