How to Replace Torque Strut Engine Mount 2010 2013 Ford Transit Connect

Buy Now!
New Engine Torque Strut Mount from 1AAuto.com http://1aau.to/ib/1AEMT00260

This video shows you how to install a torque strut engine mount on your 2010-2013 Ford Transit Connect. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect

Tools you will need:
• Pry Bar http://1aau.to/oII/1AXAA00020
• 15mm Wrench http://1aau.to/oLH/1AXAA00010
• 13mm Socket http://1aau.to/oa3Z/1AXAA00015
• 1/4 Inch Ratchet http://1aau.to/oaLV/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa3Z/1AXAA00015
• Torque Wrench http://1aau.to/oamy/1AXAA00044
• Gloves http://1aau.to/ozD/1AXSS00048
• Safety Glasses http://1aau.to/otH/1AXAA00343
• Floor Jack http://1aau.to/oQe/1AXAA00068
• Pole Jack

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.