Protect your £900 BMW GS Headlight with Wunderlich's clear headlight protector-full installation 😜

HEALTH WARNING : LONG VIDEO 🤪

Nippy Normans, kindly sent me the
Wunderlich clear headlight protector to do an installation video.

The cost of a stone going through your new BMW R1250GS'S headlight will be expensive, £900?

The headlight protector is of very good quality, but as I have the OEM auxiliary lights, the mounting bar causes the install to be an issue, kind of .

The instruction in the box are not that clear , hence Nippy Normans approaching me . Customers give negative feedback on the install instructions , particularly GS’s with the auxiliary lights mounting bar under the beak.

Best method , is to remove the side fairings and beak , to make access to the mounting bar nuts , so much easier ! Less likely to damage your pride and joy.

Panel removal is about 10-15 minutes

Installation of headlight protector is 10-15 minutes

Putting the panels back, another 10-15 minutes

TOTAL TIME IS ABOUT 35-45 MINUTES WITH LITTLE STRESS😁

Part number : WUN-26660-300
£119

You can try to access the bottom frame mount screws/nut if you want and not remove panels etc, but it will bring you a bit of frustration and possible frame scratching .If so, jump to 06:23 below.😁

00:00 Introduction
01:12 What's in the box
03:19 Prepare the bike for the install
06:23 Installing the headlight
18:18 Final thoughts


I am sure there are other ways, but this is mine, with the auxiliary lights and mounting bar and no damage caused 👍

Headlight protector supplied free from these good folk:
https://www.nippynormans.com

For more information of the Wunderlich Headlight protector :
https://www.wunderlich.de