Saber Tactical Chassis Install for the FX Dreamline Classic without an External Power Adjuster

In this video we discuss the features of the Saber Tactical Chassis for the FX Dreamline rifle. This video includes two parts. The first part is a description of the features of the Chassis. The second part, starting at 7:50, covers installation of the rifle into the Chassis. The installation of the rifle into the Chassis takes less than three minutes.

To complete the installation you will need a 3mm Allen key. There are two screws, a long one and a short one, and a large spacer block. Both the block and the screws are included in the kit. The longer screw goes in the back of the Chassis, under the hinge in the folding stock. The shorter screw connects the action to the Chassis, and is inserted in the bottom of the Chassis. The Chassis kit comes with two blocks. The larger block is for the Dreamline without an External Power Adjuster, and the smaller one is used with an External Power Adjuster...but to be clear, you get both.

This installation was completed with an FX Dreamline that does not have an external power adjuster. We have also filmed a version of this installation video using a Dreamline that has an External Power Adjuster.

For information on the gear used in this video please refer to the following websites:

Saber Tactical Chassis for FX Dreamline
https://sabertacticalinc.com/

For more information about the Dreamline platform
https://fxairguns.com/

FX Dreamline Base
https://utahairguns.com/