SaberTactical Chassis Install Dreamline Power Adjuster

In this video we discuss the features of the Saber Tactical Chassis for the FX Dreamline rifle. This video includes two parts. The first part is a description of the features of the Chassis. The second part, starting at 7:41, covers installation of the rifle into the Chassis. The installation of the rifle into the Chassis is easy and quick, but does require the removal of the External Power Adjuster Wheel.

To complete the installation you will need both a 2mm and a 3mm Allen key. There are two screws, a long one and a short one, and a small spacer block. Both the block and the screws are included in the kit. The longer screw goes in the back of the Chassis, under the hinge in the folding stock. The shorter screw connects the action to the Chassis, and is inserted in the bottom of the Chassis.

This installation was completed with an FX Dreamline that has an External Power Adjuster. We have also filmed a version of this installation video using a Dreamline that does not have an External Power Adjuster. The Saber Tactical Chassis comes with the parts needed to install your rifle whether or not you have the External Power Adjuster. It's easy to see which block is used for which installation, just remember that the longer screw goes in the back!

For information on the gear used in this video please refer to the following websites:

Saber Tactical Chassis for FX Dreamline
https://sabertacticalinc.com/

FX Dreamline External Power Adjuster
https://fxairguns.com/

FX Dreamline
https://utahairguns.com/

Should you have an External Power Adjuster with the stainless socked cap screw holding the plug in the back of the Power Adjuster, I used a pair of M5 grub screws with .80 thread pitch. One screw was 12mm and one was 4mm, and I put them in opposite each other. The Power Adjuster came with just one screw, but two threaded holes. I put grub screws in both holes. It seems to be holding the plug in place and I will report if I have any problems.