GFRC Concrete Worktop Mix - Pouring or Casting - Video 2

In this 2nd video in our series we show you how to pour or "cast" our GFRC Worktop Mix.

Chapters

00:00 Pour the facecoat
03:19 Pour the fibre-reinforced backcoat
06:06 install the inner formwork
08:28 Pour the formwork or lip mix


This is the 2nd video in the series. Make sure you watch all the videos to build up a picture of the full project methodology.

Each GFRC Worktop Mix Pack contains;

- 1 bag of base mix
- 1 pouch of colorant/dye
- 1 pouch of superplasticizer
- 1 pouch of Glass Fibres

In the video we not only show you how to cast both the face and reinforced backer mix. The piece of concrete that is being made is 18mm in thickness and has 40mm lips around the edge to give an appearance of greater thickness. Watch how we show you how to simply pour the concrete into the mould.

In the video we use the following ancillary items;

1 Main Mixing Vessel - https://amzn.to/455Z81Z
2 Glue Gun - https://amzn.to/44Nnc9z

If you have any queries about the mixing process please pop your queries in the comments box below.

This is the first video in the series. Make sure you watch the following videos to build up a picture of the full project methodology.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

SUBSCRIBE: https://www.youtube.com/c/ConcreteLab...

OUR WEBSITE: http://www.concretelab.co.uk

OUR SUPPORT WEBSITE: http://concretelab.support

INSTAGRAM:   / concretelabuk  
FACEBOOK:   / concretelabuk  
TWITTER:   / labconcrete  

HOW TO CONTACT US:

[email protected]
[email protected]