How to Replace Front Lower Control Arms 2011-2021 Jeep Grand Cherokee

Buy Now!
New Control Arm from 1AAuto.com http://1aau.to/ic/1ASLF00768

This video shows you how to install new front lower control arms from TRQ on your 2011-2021 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

Estimated installation time for a professional technician is approximately: 3 hours 24 minutes

This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee

Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/o98/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/obJA/1AXAA00017
• 18mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/otx/1AXAA00266
• 23mm Socket
• 27mm socket http://1aau.to/oaA/1AAST00007
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obJA/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/ocaD/1AXAA00015
• Torque Wrench http://1aau.to/obdY/1AXAA00044
• Gloves http://1aau.to/obaT/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• 11mm Allen Wrench
• Floor Jack http://1aau.to/oazr/1AXAA00068
• Jack Stands http://1aau.to/oamf/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.