Fitting Bus Wires & Power unit/Facia On The Modular Layout Ep 05

Welcome back, progress is being made as today we finally solve the issue of where to fit the power facia, With a bit of tinkering around and trimming away the facia sits perfectly flush and definitely looks the part….

Moving onto the second part of the video we attack the wiring installing the bus / Terminal, getting all the droppers connected up and getting power to the track. We was hoping to have the point motors fitted in this episode but unfortunately we ran out of time.

Rest assured next episode is all about SEEP point motors and installing the point switches. Along with the CDU.




Please don’t forget This is all work from a beginner, I’m learning as I go. I value all comments, tips & tricks not just for me but anyone who is wanting to start the journey on model railways. This is a modular build planning to be at least 5 modules. As each module progresses and we move onto the next module we will see improvements regarding skill level.