How To Make A Monitor Stand / Riser By Bending Wood At Home!!

In this video I will show you the prosses of how I made this homemade curved DIY computer monitor stand ! I use poplar that cost $3.57 a board foot in my area, I need about 3 to 4 board feet to make this monitor riser. I Used this wood bending technique called Kerf cutting to rise the monitor 3 inches higher. I did ruin a piece of walnut on my first attempt but got it right on the second go around on some poplar. By no means did it come out perfect but i am extremely happy with the results!

Video is for entertainment ONLY, I am not a professional please be careful with any tool and try at your own risk.

Stuff I Used in the Video (Affiliate Links)

Irwin Clamps: https://amzn.to/3gw0gDO
Rode Wireless Go: https://amzn.to/341iSqd
6-Inch Combo Square: https://amzn.to/3gwDGe9
Precision Square in Tool 12-inch: https://amzn.to/37KrAdy
Pot to boil water: https://amzn.to/3gACZAz
Titebond II Glue: https://amzn.to/34g2Nxd
Makita Router: https://amzn.to/37Rhfww
Jorgensen 24-inch Parallel Clamp: https://amzn.to/3lZ8Hsx

Kerf Cutting Calculator: https://www.blocklayer.com/kerf-spaci...

#diychannel #maker #woodworker #howtobuild #jarmade